1. Find Item E and read its opening
Locate the text labeled E) in the ICAO NOTAM. Start with the subject and condition stated at the beginning: identify what is affected and what has happened to it or what status it has. ICAO processing guidance calls for essential information—the decoded and amplified subject and condition—to appear first in Item E. [1]
Read E as the NOTAM’s operational description. It is free text in plain language, although that text can contain approved abbreviations and abbreviated phraseology. “Free text” does not mean that every word is written out in ordinary prose. It means the description is not expressed as the NOTAM Code. The E-line is that plain-language description, including ICAO abbreviations, rather than the coded subject and condition on the Q-line. [1][2]
For an initial reading, write a short working statement:
- Subject: the facility, service, area, procedure, or other item described.
- Condition: the reported closure, unavailability, change, restriction, or other status.
- Unresolved detail: any abbreviation or wording that must be understood before the condition can be interpreted.
This statement is a reading aid, not a replacement for the original text. If the subject or condition cannot be identified, do not guess from a familiar word alone.
2. Read the entire E field for qualifications
Continue through all of E before deciding what the description says. The opening should carry the essential subject and condition, but later wording may identify the affected portion, state a reason, describe an exception, or otherwise qualify the opening. ICAO guidance calls for text that is concise and clear while retaining essential information. [1]
Example: preserve an exception
Consider this invented fragment, not an issued NOTAM:
E) RWY 09/27 CLSD EXC EMERG OPS
The opening indicates a runway closure. The remaining words qualify that statement: emergency operations are excepted. A summary that says only “runway closed” drops a qualification; a summary that says “runway open for emergencies” fails to retain the stated closure. The reading must preserve both parts.
The fragment is not a complete NOTAM. It does not, by itself, establish when the condition applies or supply every operational detail needed for a decision. Its purpose is to show why reading can neither stop at the first recognizable abbreviation nor discard the rest of E.
When reviewing a longer E field, check for:
- Identifiers: Which runway, facility, service, or area is named?
- Extent: Is the condition described for the whole subject or only a specified part?
- Status or change: What is unavailable, restricted, altered, or otherwise affected?
- Qualifications: Are there exceptions, conditions, or other limiting phrases?
- Unresolved wording: Does an abbreviation or phrase prevent a reliable reading?
Do not convert an exception into a general permission or infer an unstated exception. Preserve the wording and seek clarification when its effect is unclear.
3. Keep E separate from the other NOTAM fields
Use the other fields to answer their own questions. Do not substitute one field for another merely because they appear in the same message. ICAO NOTAM examples and guidance distinguish the qualifier line, effective times, schedule, descriptive text, and vertical limits. [1][2][3]
Q: the qualifier line and NOTAM Code
The Q-line contains qualifier information, including the NOTAM Code. The code provides a coded subject and condition; E supplies the decoded and amplified description. The two can be compared, but a code is not a substitute for reading the complete E text. The Q-line contains more than the code alone. [1]
B and C: the effective period
Use B) and C) to read the beginning and end of the NOTAM’s effective period as presented. Do not treat either field as the plain-language condition. Conversely, identifying a closure or restriction in E does not, on its own, establish whether it is in effect at the time being assessed. [1][2]
D: a schedule within the period
When D) is present, read it for the applicable schedule. A schedule can be necessary to determine when a condition described in E operates within the broader period. Do not assume that a condition applies continuously merely because it is stated in E; read the schedule and its relationship to the effective period. [1][2]
F and G: vertical limits
When F) and G) are present, read them as the lower and upper limits supplied for the NOTAM. Do not treat them as substitutes for the condition described in E. Equally, do not infer a complete altitude applicability assessment from E alone: read the relevant limits and any qualifications in the message. [1][2]
This separation is a reading discipline, not a reason to ignore information that appears elsewhere in the text. A detail in E may qualify the described condition; the applicable time and vertical assessment still requires the relevant fields and operational context.
4. Check E against the coded condition without flattening the text
After reading all of E, compare its subject and condition with the NOTAM Code in the Q-line. The check is whether the coded classification and the description are coherent—not whether the code reproduces every qualification in E.
For example, an operator using VectorWX can compare the Q-line code with the complete E text and record whether the two appear consistent. The operator should retain the original E wording, including any exception or limitation, rather than replacing it with a shorter code-derived label.
For NOTAM processing, ICAO guidance specifies how to handle a code found in E: move the code to Q and decode it in E. If no code is present in E, derive the subject and condition from the text for the processing check. A mismatch or unclear description calls for investigation; it is not a reason to silently choose whichever field seems easier to interpret. [1]
Check: can the reading be traced to the message?
Before accepting the interpretation, verify that:
- The stated subject and condition can be located in E.
- The whole E text has been read, including qualifications after the opening.
- The Q-line comparison does not contradict the E description.
- B, C, D, F, and G have not been mistaken for the E description.
- Any uncertainty is identified rather than filled with an assumption.
A successful check establishes a defensible reading of the description. It does not alone establish operational applicability at a particular time, place, or altitude.
5. Stop when the meaning remains ambiguous
Stop condition: If the subject, condition, or a necessary qualification in E remains ambiguous after the complete text and relevant cross-checks have been reviewed, do not present the interpretation as settled.
Preserve the original wording, identify the specific uncertainty, and seek clarification through the appropriate NOTAM or aeronautical information process. For NOTAM processing, ICAO guidance prescribes a query procedure under which the original NOTAM is made available with “NOTAM Subject to Query” added at the beginning of Item E. That is a processing action under the prescribed procedure, not an instruction for a reader to alter an issued NOTAM independently. [1]
The endpoint for this procedure is a supported reading of what E describes: the subject, its reported condition, and the qualifications attached to that condition. The separate determination of whether the NOTAM applies to a particular operation requires the other relevant fields and operational context.